Hand & Foot Turkey

I had some time with my 4 year old, so we decided to make some Thanksgiving crafts to have on display when we hosted dinner.  This takes a bit depending on how long you wait to let the layers of paint dry, but turned out really cute!

Things you'll need:

 - red, orange, yellow,
   and brown paint

 - paintbrush

 - googley eyes

 - hands and feet!!

I thought it would be easiest to have the darkest color on the bottom so that it would show through the others as you put more prints on top, but you're welcome to switch it up however you would like to.  I do recommend waiting until the print is almost dry (or fully dry) before putting another print on top.  You'll see the progression photos around this post.  We tried to alternate the hands around a bit so they were not perfectly aligned.  I may actually recommend flipping the hands to the opposite side to completely get a different pattern.

After we let that dry, I coated her foot in brown paint and tried to make it so that the toes (feet) were below the hand feathers.  We added two google-y eyes after it dried and also a yellow beak.  You can add a beak cutting out a triangle from construction paper or I used the back of a paint brush to make a triangle with yellow paint.

Ghost Prints

Alexandria did this craft last year around Halloween at daycare, so I thought I'd recreate it since I thought it was really cute; plus this way I could see how much her foot has grown in a year!  We invited over our neighbor's son to make some ghosts too and they both had a really fun time.  This is an incredibly simple craft that takes next to no time at all.

Things you'll need:

 - Black paper (or orange also works)

 - White paint

 - Tiny google-y eyes

 - Paintbrush

 - Feet with Piggies!

As I said, it's pretty simple.  Paint your child's foot with the white paint; I think thicker you apply the paint, the better the result for this craft.  Stamp their foot on the paper wherever you'd like.  I end up cutting out around the feet so that it's smaller to display, but you could make a row of ghosts using both feet if you want to line the paper with them.  I had Alex do about 4 foot prints so that I could cut out a few of them separately to give as little Halloween mementos.  After the paint dries, add the google-y eyes to the ghost.  You can also add a comment bubble to the craft if you'd like to have it say, "BOO!" or add a little smiley face...and that's that!

I hope everyone has a safe and fun Halloween!!!

Butterfly Tootsies

Spur of the moment distraction idea for Alexandria was to make some butterflies in the morning before heading over to Grandma's house.  This was really quick and easy; also came out rather cute!!

Things you'll need:
 - paper
 - two or more different color paints
 - black marker
 - brush or anything to apply paint to feet!
 - tiny feet & fingerprints

First things first, grab a foot and paint the bottom.  You could get creative with this step and paint it various different colors so that the butterfly's wings are more colorful, but for today I stuck with a solid color.  Apply paint and stamp on the paper so that the footprints are on the opposite side than where they normally would be.  Wash, dry, repeat with opposite foot!  A trick I use is to always have Alexandria stand on the non-painted foot while I hold the foot with paint up in the air.  That way she has her weight on the other foot and I can more easily place the painted one onto the paper.

Final paint step (yes, I said this was easy!) is to grab a finger or two, dip them in paint and then have them create prints up the middle to make the butterfly's body.  A thumbprint works great for the head or you can just paint a larger circle with a finger like we did.

Wait for the paint to dry and then you can add the finishing touches.  Two dots for the eyes, a little smile and two antennae!  Quick, but cute butterfly memories!

Lobster with Daddy

In an attempt to get some work done, I suggested my husband do a craft with Alexandria the other day since she really calms down while doing crafts even if they don't last that long.  I picked out a really cute lobster idea that I saw and set them on their way.

Things you'll need:
 - Red paint
 - Paintbrush
 - White paper
 - Black marker
 - Google-y eyes
 - Glue

First thing first was to do the hand prints that would act as the lobster claws.  Use the paint brush to apply paint to one hand at a time and make the print on the paper.  Alex really enjoys this part! :)

For your own sanity, be sure to wash each hand after the print has been made!  After that, apply paint to a foot (either foot will work, so whichever is easiest) and make that print so that the toes are at the bottom of the paper and the heel will act as the lobsters head.

Next step is to add the arms and legs to the lobster.  My husband just free handed these with the paintbrush.  The beauty of crafts at home is that imperfection is actually the greatest part of the craft; at least I think so!  (Not that my husband did any part not perfect :-P)  After everything is all connected, then you can glue on the google-y eyes at the top of the head (heal).  Last step is to add the antennae and smile using the black marker as the final touch!

Hop Hop

In the spirit of Easter and having some extra time this morning with Alexandria before her Easter party at daycare, I decided to make a bunny using her feet as the ears to give to her teacher (and to keep one for at the house).  My neighbor gave me the idea when she sent me a similar craft picture the night before that her son had done at school and I thought it was so cute that I had to give it a try.

Things you'll need:
 - Pink paint & a paintbrush
 - Black marker
 - White paper
 - Tiny toes

The foot prints (one of each foot) will become the ears of the bunny, so you want to have them looking and angled the same as much as you can depending on the age and squirmy-ness of your child!  I held Alex on my lap and painted one foot.  I let her stand up on her non-painted foot and then pressed her painted foot down with my hand onto the white paper held vertically.  After washing that foot off in the sink, I repeated with the other foot.

And that's almost it!  After that, I made ears around the footprints and then drew in the face of the bunny.  My neighbor's son had cut out he bunny and glued it to another colored piece of paper to give it some extra color, but we were on a time crunch, so I just left it on the white piece of paper.  Any finishing touches will do and you have a quick and easy bunny rabbit with keepsake footprints in a matter of minutes!

One Year Paw Prints

Alexandria thoughtfully (with some extra thought by Mama) got both my husband and I the same frame/kit for Christmas that we could use to make a keepsake for her first birthday.  She bought the BabyPrints - Photo and Baby Footprint Desktop Frame at Babysakes.com.  They have various versions of the same idea, but we thought it would be nice to have a picture with the print.  The frames come in all different sizes, colors and layouts so you can pick whichever you like the most.  We also chose to have my husband's be a footprint and mine be a hand print so we had one of each as a keepsake.

Things you'll need:
 - BabyPrints kit (or substitute using the suggestion in the note at the bottom of the post)
 - Baby for hands & feet
 - Aluminum foil
 - Hardcover book about 8 inches square (I used one of Alex's many board books)

The instructions were pretty good that came with the kit.  You cover a book with the aluminum foil so you have a non-sticky surface to roll the 'printing clay' on.  You knead the printing clay for a few minutes (make sure your hands are clean as any spec of dust/dirt shows on the white clay) and then roll it out on the board.  You might want to keep in mind while rolling what type of shape you'd like the print to end up on.  My rolling came out in circles / ovals, so I just rounded them up a bit after we did the print to make them more uniform.  You could also roll it so that it's more of a rectangle / square shape so you can make even edge trims after you do the print.  Whichever you choose, I would say I rolled it until it was about a 1/4 inch thick or maybe a little more.  There's really no science or trick to getting a level surface, but now that I think about it, I may have been able to press a book on top of it to level it off and make it even; might be worth a try!

As with others, my husband's help was needed for the foot print to hold Alex up over the print.  We did let her put a decent amount of weight on her foot once it was placed on the clay.  With the hand, I sat her on my lap and put her palm down on the clay first while I spread out her fingers and then smushed her hand into the clay. 

You then let the prints sit for a few hours and then flip them over based on the instructions so that the backs could dry.  Personally, I let them sit just the way they were for a day because when I tried to flip it over, some of the clay was sticking to the foil and I didn't want to ruin it.  I think we let them sit for about 4 days and I flipped them back so that the print was facing out after a day of the back facing out.  After it's dry, you assemble them in the frames and are done!  Now they provide double sided sticky tape for this which does NOT work, so I'd try to use something more permanent to stick the print to the matte they provide so that it stays on better.  Here's the final product!

Because the hand print was larger than would fit in the white matte frames they provided, you can see the brown piece in the print side of the frame that separates the glass from the print.  The white mattes they included in the kit covered some of the hand print edges, so I just didn't put them in.  I'm considering painting the brown piece white so that it contrasts better with the other side and doesn't look dingy!  After that, all I have to do is find an empty wall or table top on which to display them!

**NOTE: If you'd like to do this without buying a kit, I suggest using Crayola Model Magic as it is the same consistency and has the same drying effects as the 'printing clay' that came with the kit.  You'd just have to find a frame that you could use that had some depth on one side so that the hand/foot print would have room to fit behind the glass.